image
image
image
image
image
image
image
image

All State Conveyors Pty/Ltd

Your Partner In Conveyor Service Excellence

 
Autoclave Hot Bonded Lagging and Rubber Lining

Do You Need Your Steel Conveyor Drum, Pipe or Part to Be Hot Bonded with Rubber Lagging? Then We Can Supply Custom and Standard Lagging Direct from Our Facility.

 

Superior bonding of rubber to metal requires an autoclave which applies both heat and pressure to the conveyor drum or product that is placed inside of it. This process gives one of the best possible rubber to metal adhesion ratings when compared to the cold bonding process using rubber based glue.

The key component of the industrial autoclave is the application of pressure, during the heating process the materials are under constant pressure for the curing time of the cooking process. This positive pressure pushes the rubber to gain maximum contact with the metal and uncured rubber primers giving a long lasting and overall excellent working life of your lagged or lined steel component.

 

After the cooking process the conveyor drum can be grooved with either a diamond or chevron pattern or simply left as a plain flat finish. Most parts can be done with a 60 duro abrasion resistant rubber but other types can be applied such as coloured neoprene or nitrile blends for the printing and food industries.

 

Should you require a turn-key component then All State Conveyors can assist with manufactured drums, pipes and components to give you the fastest possible turnaround times and a one stop shop facility.

 

 

 

 

 

 

 

 

 

 

1x1

 

 

logo

 

All State Conveyors © 2016, All Rights Reserved, Melbourne, Australia