Conveyor Belt Cleaning Systems
All State Conveyors (ASC) stock Conveyor Scrapers and Conveyor Cleaners, both of which are very efficient methods for cleaning and reducing carry back as shown in the adjacent picture.
As an authorised agent for Flexco Australia, ASC are able to directly supply Primary Belt Cleaners, Secondary and Reverse (Return) Belt Cleaners to suit medium to heavy-duty applications. These cleaning systems are ideal for greatly reducing clinging residue from being carried back from the unloading point to prevent the belt from misalignment and resulting in greater wear and abrasion to your conveyor operation which can greatly affect your production efficiency.

Conveyor Scrapers: Effective Way to Reduce Carry Back of Dirt, Dust or Fine Materials
Tacky and clinging materials found in mineral process conveying often cause hazards to both your equipment and the functioning of your conveyor system. These materials often remain on the conveyor belt on the return side, eventually drying and dislodging onto equipment and sometimes even operators themselves.
This carry back, which often originates from the unloading point, will result in a number of problems. If you install a conveyor belt cleaner which removes material adhering to the return belt at the unloading point, you will minimise the following:
- Depreciation of your componentry
- Excessive accumulation of material (s) on your idlers
- The conveyor belt misaligning
- Chain reaction of wear which will affect operational effectiveness.
3 Main Types of Conveyor Scrapers
Conveyor cleaning systems can come in many forms, to suit a number of cleaning applications. There are 3 main types of conveyor scrapers:
- Primary belt cleaners (also known as pre-cleaner),
- Secondary Belt Cleaners (also known as tertiary cleaners) and
- Return belt cleaners (also known as ploughs’).
As speeds and loads on conveyor belts increase, it is more effective to have a system of conveyor belt cleaners pass over the area.
Click for Continental Conveyor Belt Cleaners PDF
Click for Flexco Conveyor Belt Precleaners PDF
ASC Belt Scraper Options (Reliable, High in Quality and Performance Driven)
All State Conveyors Belt Scrapers are designed to be applied to various sections of the conveyor belt as the speed increases. These ‘Fit for Purpose’ cleaners are shaped differently to maximise the effectiveness of cleaning the belt.
At All State Conveyors, we offer a Primary Belt Cleaner and a comprehensive range of superior engineered Secondary Belt Cleaners known as Tertiary Cleaners and (Return)(plough) Belt Cleaner options. These scrapers have superior features to suit medium to heavy-duty applications and to help you minimise carry back, avoiding conveyor roller seizure as well as the need to be maintained and replaced often; keeping your conveyors running as consistently, safely and efficiently as possible.

Minimising Maintenance to Save on Major Repair Costs
There are some far-reaching positive returns with investing in the right cleaners for your conveyor system. Not only do they drive down operational costs but also improve the conveyor performance and in turn the safety of your team. You need the product on the belt and not on the ground.
By effectively removing the potential hazards from your belt, you extend the performance of your conveyor and greatly influence the management of your maintenance and clean-up costs.
Conveyor Scraper Selections
FGP Food Grade Precleaner
Pulley Diameter Range: 50mm – 267mm
Available in standard blade widths – 300mm to 1500mm
EZP-LS Limited Space Precleaner
Maximum Belt Speed up to 500 fpm (2.5 m/sec)
Pulley Diameter: 150mm – 55 mm
Belt Widths: 300mm – 1500mm
EZP1 Precleaner
Maximum Belt Speeds up to 700 fpm (3.5 m/sec)
Pulley Diameter: 250mm – 900mm
Belt Widths: 300mm – 1800mm
The MSP Standard Mine-Duty Precleaner
Belt Speeds up to 700 fpm (3.5 m/sec)
Pulley Diameter: from 400mm – 1050mm
Belt Widths: from 600mm – 2100mm
MMP Medium Mine-Duty Precleaner
Belt Speeds up to 1000 fpm (5.0 m/sec)
Pulley Diameter: 400mm – 1200mm
Belt Widths: 600mm – 2400mm
MXP Extreme-Duty Precleaner
Belt Speeds up to 2000 fpm (10.0 m/sec)
Minimum Pulley Diameter: 1200mm
Belt Widths: 1050mm – 3000mm
H-TYPE® Segmented Blade Precleaner
Belt Speeds up to 1000 fpm (5.0 m/sec) or 1500 fpm (7.5 m/sec)
Pulley Diameter: 250mm – 1675mm
Belt Widths: 450mm – 1800mm
The MHCP Heavy-Duty Cartridge Precleaner
Belt Speeds up to 1200 fpm (6.0 m/sec)
Pulley Diameter: 500mm – 1200mm
Belt Widths: 600mm – 2400mm
Enquiry about the MHCP Heavy-Duty Catridge Precleaner, click here
P-TYPE® Secondary Cleaner
Belt Speeds up to:
C-Tip: 1000 fpm (5.0 m/sec)
V-Tip: 1200 fpm (6.0 m/sec)
Belt Widths: 450mm – 1800mm
R-TYPE® Reversing Secondary Cleaner
Belt Speeds up to
C-Tip: 1000 fpm (5.0 m/sec)
V-Tip: 1200 fpm (6.0 m/sec)
Belt Widths: 450mm – 1800mm
Y-Type™ Secondary Cleaner
Belt Speeds up to
SD: 600 fpm (3 m/sec)
HD: 750 fpm (3.75 m/sec)
Belt Widths
SD: 450mm – 1200mm
HD: 900mm – 1800mm
MHS Heavy-Duty Secondary Cleaner
Belt Speeds up to 1500 fpm (6.0 m/sec)
Belt Widths: 450mm – 2400mm
The EZS2 Secondary Cleaner
Belt Speeds up to 700 fpm (3.5 m/sec)
Belt Widths: 450mm – 1800mm
U-TYPE® Secondary Cleaner
Belt Speeds up to
C-Tip: 1000 fpm (5.0 m/sec)
V-Tip: 1200 fpm (6.0 m/sec)
Belt Widths: 450mm – 2400mm
MDWS DryWipe Secondary Cleaner
Belt Speeds up to 1000 fpm (5.0 m/sec)
Belt Widths: 600mm – 2100mm
Chevron Secondary Cleaner
Belt Speeds up to 500 fpm (2.5 m/sec)
Belt Widths: 450mm – 2100mm
Motorised Brush Cleaner
Belt Speeds up to 700 fpm (3.5 m/sec)
Belt Widths: 450mm – 2100mm