Call us for 24/7 emergency service

  • (03) 9706 6339
All State Conveyors Logo

Standard and Specialised Profile Belting

All State Conveyors not only supply a comprehensive range of flat rubber textile conveyor belts but we also stock cleated belting with 10 ~ 50 mm high profiles such as Chevron C15 ~ C25, Multi-V, Sargent Stripe, Bulls Horn, C5 and V6 Configurations. Additionally we also cater for on-site repairs and the supply and installation of your conveyor belt.

Profile belts are suitable to be used for conveying various types of materials, ideally suited for mineral processing and general mining applications including fixed plant and mobile stackers, screening, crushing systems.

These profile conveyor types have a high handling capacity and are designed to carry aggregate, sand and granular products through varying degrees of elevation.

High Handling Capacity, Reduce Spillage & Risk of Product Fall

All State Conveyors Profile Belting is designed for high capacity bulk handling situations and is ideal for mineral processing and for general fixed and mobile plants utilised in mining and quarry processing applications. This belting is also suited for conveying sand, grains and other similar sized material.

In addition to your typical N, Din-Y and M grade profile belting we also stock profile belts with cover compounds suitable for conveying hot items, goods containing oil and grease and for steep-incline conveying. You can also specify suitable reinforcing materials for particular applications. (go to Chevron belt page)

Profile Features for a Conveyor Belt System

A profile troughed conveyor is a belt that forms an actual trough and cradles the conveyed product, due to conveyor rollers and frames that are designed for this type of configuration. Whilst the belt runs over idler rollers the cleat configuration helps to stop product rolling or slipping back by way of supporting and hunching the material against the profile to move it forward on variable moderate inclines.

Cross belt flexibility or rigidity of the belt is very important with this system. The ‘u’ shaped trough roller frame houses the belt idler and is designed to reduce spillage and allow for reduced risk at higher speeds and increased production and safety.

Suited for Mining, Quarrying, Heavy Duty Industries

Profiled rubber textile conveyor belts are utilised in a wide range of conveying applications. The industries that most utilise Profile Conveyor Belt types are mines and quarries that are processing rock ballast, sand and aggregate, as well as many other industrial equipment types such as mobile crushers and screens. Profile rubber textile conveyor belts can be utilised by Brick and Tile manufacturers, Clay pits, Wood Chip Processing, Sand Plants, Concrete Batching Facilities, Green Waste Recycling; Fertiliser, Lime and Gypsum Spreaders.

All State Conveyors


  • Mining, quarrying and fixed plant operations
  • Sand, rock and aggregate processing
  • Mobile screens and crushers
  • Brick and tile manufacturers
  • Claypits
  • Limestone and other mineral quarries
  • Wood chip processing
  • Sand plants
  • Concrete batching plants
  • Builder waste recycling
  • Green waste recycling
  • Fertiliser plants and super spreaders

ASC Services and Materials Provided

All State Conveyors supply parts and services for fixed or radial and mobile stacker systems which include:

  • Belt Supply and Installation
  • Belt Sidewall and Cleat installation
  • Hot and Cold Vulcanised Splicing and Repairs
  • Rubber and Polyurethane Skirting
  • Drum hot or cold lagging
  • Belt scrapers and cleaners

Range of Conveyor Belting:

  1. Grade AS-M rubber textile conveyor belting
  2. Grade AS-N rubber textile conveyor belting
  3. DIN-Y rubber textile conveyor belting
  4. Oil resistant nitrile blended rubber textile conveyor belting
  5. FRAS rubber textile conveyor belting
  6. Heat resistant rubber textile conveyor belting
  7. Chevron pattern (profiled) rubber textile conveyor belting
  8. CFW rubber textile conveyor belting
  9. XCG textile rubber conveyor belting
  10. Corrugated belt sidewall
  11. Cleated and flat rubber belting
  12. Thrower belting

Read full details of rubber textile conveyor beltings, click here

Maintenance and Repair of Your Troughed Conveyor Belt System

All State Conveyors not only stock the appropriate belting types and spare parts but we also offer solutions to deliver routine maintenance, repairs, replacement and or removal of the used Conveyor Belt. We also have the ability to offer you audits for contractual routine or ad hoc maintenance scheduling.

Reviewing Your Conveyor Parts

When considering your Conveyor Belt System repair or replacement, you should also consider reviewing your wear plates in your feed chutes and hoppers, discharge chute lining, polyurethane and rubber skirting, belt cleaners and self-cleaning tail drums, belt scrapers, hungry boards/skirting systems; head, snub and tail drums, troughed roller sets and impact beds or bars to see if they are also in good working order for optimal efficiency.

All State Conveyors are happy to advise which belt may be suitable for your individual application. ASC ContiTech conveyor belts are manufactured and supplied to Australian Standards 1332.

In association with our local and international partners, we can provide you with a number of conveyor belt solutions. We are able to assist you to adapt or modify your existing conveyor belt, supply spare parts for your conveyor system as well as undertaking routine belt inspections, or belt repair maintenance to maximise the working life of your equipment.

Other Conveyor Belt Systems