Chevron Pattern (Profiled) Textile Conveyor Belts

Do you need a conveyor belt with better grip and load stability for steep incline conveying?

All State Conveyors offers suitable high tensile strength Chevron Patterned Conveyor Belts with cleated designs including Closed-V, Open-V, Bull Horn and Multi-V profiles.

Why Chevron Pattern Conveyor Belts?

Smooth belt inclining conveyors do not have the same ability to convey material as their maximum angle which, is only between 15° ~ 22°. However, steep angle cleated conveyor belts with a profiled surface such as the Chevron pattern belt is able to increase your conveyors loading capacity and manage the load to reach an inclination of 30°and in some cases 40° (conditions dependant).

Durable Profiled Textile Conveyor Belt

ASC stocks chevron pattern (profiled) textile conveyor belts

All State Conveyors offers a wide range of Chevron Pattern Textile conveyor belts that are comprised of high tensile strength Polyester/Nylon (EP) woven fabric ply carcass, which ensure a low stretch tension member that enables short take-ups.

There are also different cover compounds comprised of polymers and fillers which provide protection to the carcass from abrasion and impact. These covers also come in a wide variety of cover thicknesses to meet your operating situations. ASC will assist you to decide which profile is suitable if necessary.

Chevron Pattern Conveyor Belt Carcasses with Cleated Top Covers Have:

  • High tensile strength
  • Low elongation
  • Excellent return side support on full width return idlers
  • Abrasion resistance qualities
  • Greater material stability for inclined angles

Designed for Over 22º of Steep-Incline Conveying

Profiled conveyor belts with high slip resistant are ideally suitable when the conveyor’s angle of inclination is no more than 22° as the upper limit. These cleated belts are ideal for light to heavy weight with a steep incline. The chevon patterned belt ideally carries materials such as bulk solids or unit loads, with suggested angles from:

Approx. 30° for slightly rolling materials, such – as gravel, coal etc.
Approx. 40° for sticky materials, such as wet sand, earth etc.
Approx. 25° up to 35° for packages, such as sacks, bales (paper hessian) etc.

The values given are just an orientation and depend on the type of goods conveyed, loading conditions and the conveyor belt speed.

Chevron (Profiled) Belts Suitable Applications: Steep-Incline Conveying Tasks

Chevron Pattern Conveyor Belts are used for a wide range of conveyor tasks and suit the following industries such as grain processing‚ sugar refineries, agriculture, cement works, sand‚ rock mining, quarrying and mineral processing, mobile crushers and screens for steep inclines. Cleated belts also increase the amount of granular materials being carried, in heavy duty incline applications.

ASC Chevron Patterns, Cleat Heights, Widths and Pitches Selections

All State Conveyors provide low to high Chevron Pattern Textile Conveyor Belts with a range of 6mm-50mm height vulcanised profiles with cleated design options including Closed-V, Open-V, Bull Horn and Multi-V profiles in various profile belt widths:

Low Chevron belt widths: 300mm ~ 1800mm wide
High Chevron belt widths: 500mm ~ 1800mm wide

ASC Supply Economical Closed-V and Open-V as Standard Belting

The Open-V is designed to allow for water dissemination when carrying wet materials such as wood chips, fertilisers, sand, quarry materials, minerals, coal. The cleat widths are either full width or narrowed to incorporate skirting rubber which we are able to trim to your preferred width. There are also a number of cleat pitch and belt width variants available as well.

The Closed-V is designed for the transportation of dry materials such as wood chip – bark, grain, sand, small rubble, packaged goods and baggage handling on small inclines. The cleat widths are either full width or narrowed to incorporate skirting rubber, which we are able to trim to your preferred width. There are also a number of cleat pitch and belt width variants available as well.

Non Standard Bull Horn U-Shaped Belting

ASC are able to supply the Open and Closed U-Shaped Bull Horn cleated belting. The Closed Bullhorn is particularly helpful to support the return belt as the extra vertical strutted cleat prevents the belt from sagging. The cleat widths are either full width or narrowed to incorporate skirting rubber, which we are able to trim to your preferred width. There are also a number of cleat pitch and belt width variants available as well.

There are 2 variants that affect the profile functionality; the inclination angle and the materials being conveyed. These profiles are designed to prevent or reduce slide back and increase the amount of product moved quickly at the point of loading. At All State Conveyors we have all of your conveyor belt solutions covered.

ASC Stocked Range of Low to High Chevron Pattern Conveyor Belts:

Belt Type: 2 Ply C5

EP315/2  3 x 1.5 mm (PN315)

Cover Grade: AS-N C5

Applications: Small incline conveying tasks, wood chip and bark, grain, sand and small rock, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
5300-1200100300-1200
EP315/2 3 x 1.5mm C5 Chevron Pattern Conveyor Belt

Belt Type: 3 Ply C5

EP450/3  3 x 1.5 mm (PN450)

Cover Grade: AS-N C5

Applications: Small incline conveying tasks, wood chip and bark, grain, sand and small rock, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)B.W (mm)
5300-1200100300-1200
EP450/3 3 x 1.5mm C5 chevron pattern conveyor belt

Belt Type: 3 Ply C10

EP450/3  3 x 1.5 mm (PN450)

Cover Grade: AS-N C10

Applications: Small incline conveying tasks, wood chip and bark, grain, sand and small rock, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
10500-1200150500-1200
EP450/3 3 x 1.5mm C10 chevron pattern conveyor belt

Belt Type: 3 Ply C15

EP450/3  3 x 1.5 mm (PN450)

Cover Grade: AS-N C15P380

Applications: Wood chip and bark, grain, sand and small rock, quarrying, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
15380250450-800
EP450/3 3 x 1.5mm C15P380 chevron pattern conveyor belt

Belt Type: 3 Ply 3/1.5 C15

EP450/3  3 x 1.5 mm (PN450)

Cover Grade: AS-N C15P450

Applications: Wood chip and bark, grain, sand and small rock, quarrying, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
15450250500-900

Belt Type: 3 Ply C15

EP450/3  3 x 1.5 mm (PN450)

Cover Grade: AS-N C15P740

Applications: Wood chip and bark, grain, sand and small rock, quarrying, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
15740250800-1200
EP450/3 3 x 1.5mm C15P740 chevron pattern conveyor belt

Belt Type: 3 Ply C25

EP450/3  3 x 1.5 mm (PN450)

Cover Grade: AS-N C25P450

Applications: Small incline conveying tasks, wood chip and bark, grain, sand and small rock, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
25450250500-750
EP450/3 3 x 1.5mm C25V450 chevron pattern conveyor belt

Belt Type: 3 Ply C25

EP450/3 3 x 1.5 mm (PN450)

Cover Grade: AS-N C25P550

Applications: Small incline conveying tasks, wood chip and bark, grain, sand and small rock, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
25550250500-750
EP450/3 3 x 1.5mm C25V550 chevron pattern conveyor belt

Belt Type: 3 Ply C25

EP450/3 3 x 1.5 mm (PN450)

Cover Grade: AS-N C25V750

Applications: Wood chip and bark, grain, sand and small rock, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
25750330800-1200
EP450/3 3 x 1.5mm C25V750 chevron pattern conveyor belt

Belt Type: 3 Ply C25

EP450/3 3 x 1.5 mm  (PN450)

Cover Grade – AS-N C25V1000

Applications: Wood chip and bark, grain, sand and small rock, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
251005301200-1500
EP450/3 3 x 1.5mm C25V1000 chevron pattern conveyor belt

Belt Type: 3 Ply V6

EP450/3 3 x 1.5 mm (PN450)

Cover Grade – AS-N V6

Applications: Sacks box, paper recycling, wood chip and bark, grain, sand and small rock, fertilisers, package goods and bag etc.

C.H (mm)C.W (mm)C.P (mm)B.W (mm)
6600-150076600-1500
EP450/3 3 x 1.5mm V6 multi-v pattern conveyor belt

AS-N or DIN-Y Suitable Applications: Average Operating Conditions

All State Conveyors stock a range of conveyor belting that can be configured with a range of tensile strength fabric. This configuration is then combined with high-quality belt cover profiles.

All State Conveyors also offers in-house engineered and custom fabricated belts with a choice of flexible rubber sidewalls and rubber true track to suit your application requirements.

ASC Supply Chevron Pattern Conveyor Belts

  • Cut to specified widths and lengths
  • Endless with mechanical belt fasteners
  • Endless with cold material vulcanisation
  • Endless with hot material vulcanisation

At the customers request, belt ends can be prepared for cold chemical joining or hot vulcanisation by the end user or supplied in slab rolls.

ASC conveyor belting gives you the optimum solution and confidence you need for maximum conveying performance.

Production standards: ASC ContiTech Chevron Pattern Conveyor Belts are manufactured in conforming to Australian Standards AS1332.

Email or call us on 03 97066339 to speak with our belt specialists regarding your conveying requirements to find the ideal conveyor belt for your application, or to arrange a quote.