General Purpose Rubber Textile Conveyor Belt

Do you need a conveyor belt for light to heavy-duty general conveying?

All State Conveyors stocks various textile belt grades i.e. N, DIN-Y, M, DIN-X, which are suitable for both flat and troughing systems utilised in most light to heavy-duty operating conditions.

Textile conveyor belts provide resistance against different levels of impact or tearing from conveyed products and materials. This is due to highly expandable transverse polyester cords and various combinations of fabric plies mixed with suitable cover compounds. Textile conveyor belts are the natural choice for heavy industrial such as mining, mineral processing and quarrying.

Our in-house engineering capability ensures that all belt requirements can be configured with a range of high tensile strength fabric such as Crows Foot Weave (CFW) and Extra Cut & Gouge (XCG) covers for ultimate strength and protection.

Reinforced Fabric Plies for General Conveying Services

All State Conveyors (ASC) General Purpose Rubber Textile Conveyor Belts are blended with layers of fabric plies Polyester/Nylon (EP) synthetic woven carcasses, with a low stretch tension member that enables short take-ups.

The carcass reinforcement features high tensile strength, transverse tear, fastener rip, tear and impact resistance, and are bonded between layers of cushion rubber that provide adhesion and load support. These belts give resistance to penetration damage and optimum adhesion between the plies.

Top and bottom rubber cover compounds are comprised of different polymers and fillers, which offer resistance to abrasion and impact to provide maximum protection for the belt carcass. These General Purpose Belts provide high operational reliability and durability.

All State Conveyors offer General Purpose Belts as

  • AS-M or DIN-X Grade for high abrasion and wear in harsh applications
  • AS-N or DIN-Y Grade for moderate operating conditions

The widths available range up to 2200mm and there are a wide variety of cover thicknesses available to meet your application requirements. These General Purpose Belts are suitable for light to heavy-duty bulk handling applications where resistance to abrasion, impact, slicing and gouging is required.

All State Conveyors are happy to advise which belt may be suitable for your individual application. ASC ContiTech conveyor belts are manufactured and supplied to Australian Standards 1332.

GradeCover CompoundsCharacteristics Application
MNatural Rubber / Butadiene (NR) / (BR)Extra abrasion resistant and cut resistant for heavy duty service conditions (sharp materials andadverse loading conditions)
NStyrene Butadiene (SBR)Abrasion resistant, for normal service conditions encountered in carrying bulk and aggregate materials
XNatural Rubber / Butadiene (NR) / (BR)Extra abrasion resistant and cut resistant for heavy duty service conditions (sharp materials andadverse loading conditions)
YStyrene Butadiene (SBR)Abrasion resistant, for normal service conditions encountered in carrying bulk and aggregate materials

AS-M, DIN-X Grade Rubber Textile Conveyor Belts

AS-M or DIN-X grade are premium grade textile conveyor belts with a blended reinforced carcass, of Natural Rubber and a Butadiene Rubber compounds in the top and bottom covers. AS-M and DIN-X Grade Rubber Textile Conveyor Belts resist slits and cutting damage to the fabric plies and are ideally used in harsh to tough operating conditions.

AS-M and DIN-X Grade Rubber Textile Conveyor Belt Carcass and Cover Feature:

  • High tensile strength
  • Low elongation
  • Excellent troughing ability
  • Good abrasion resistant qualities
  • Good high impact resistant qualities
  • Good to excellent cut and gouge resistant qualities

Note: In most cases, All State Conveyors recommends AS-M Grade Textile Rubber Conveyor Belts for the harshest of applications. Naturally, this depends on your operating situation and requirements. Speak to our belt specialists about your system requirements.

All State Conveyors are happy to advise which belt may be suitable for your individual application. ASC ContiTech conveyor belts are manufactured and supplied to Australian Standards 1332.

AS-M and DIN-X Suitable Applications:

AS-M or DIN-X Grade Rubber Textile Conveyor Belts are suitable for above and below ground heavy duty applications for conveying ores of all kinds such as rock, granite, sand and other sharp-edged materials in the harshest conditions for industries such as mining, quarrying, mineral processing, concrete recycling, aggregate processing or suited to any heavy industrial situation. AS-M or DIN-X Grade Rubber Textile Conveyor Belt are designed to protect the conveyor belt against damage from heavy impact and wear from the large sized lumps, sharp materials and adverse loading. This extends the conveyor belts service life and reduces maintenance downtime.

All State Conveyors are happy to advise which belt may be suitable for your individual application. ASC ContiTech conveyor belts are manufactured and supplied to Australian Standards 1332.

ASC Stocked Range of AS-M Grade Conveyor Belts

EP800/4P 6/2 AS-M AKA 4ply heavy AKA 4ply 6/2
Nominal stock widths available: 600mm, 750mm, 900mm, 1050mm, 1200mm, 1800mm, 2200mm
To download EP800/4P 6/2 AS-M Product Fact Sheet, click here.

PN800/4P 8/2 PN800 AKA 4ply 8/2
Nominal stock widths available: 600mm, 750mm, 900mm, 1050mm, 1200mm, 1800mm, 2200mm
To download PN800/4P 8/2 PN800 Product Fact Sheet, click here.

PN800/4P 10/3 AS-M AKA 4ply 10/3
Nominal stock widths available: 900mm, 1050mm, 1200mm, 1800mm, 2200mm
To download PN800/4P 10/3 AS-M Product Fact Sheet, click here.

AS-N, DIN-Y Grade Textile Rubber Conveyor Belts

AS-N or DIN-Y Grade Rubber Textile Conveyor Belts are constructed with a Polyester/Nylon reinforced carcass, featuring Styrene Butadiene top and bottom cover compounds. AS-N and DIN-Y Grade are used for applications with moderate stress requirements and are low to medium impact and abrasion resistant. These conveyor belts are a good all round budget belt with various widths of 2ply 3/1.5mm PN150 through to 3 ply 5/1.5mm PN150.

All State Conveyors are happy to advise which belt may be suitable for your individual application. ASC ContiTech conveyor belts are manufactured and supplied to Australian Standards 1332.

AS-N or DIN-Y Grade Conveyor Belt Carcass and Cover Feature

  • High tensile strength
  • Low elongation
  • Good abrasion resistant qualities
  • Good impact resistant qualities
  • Moderate to good cut and gouge resistant qualities

AS-N or DIN-Y Suitable Applications: Light ~ Moderate Operating Conditions

AS-N or DIN-Y grade conveyor belts are used for normal service conditions encountered in carrying bulk and aggregate materials where special compounds are not required. They are also used for above and below ground mining, quarrying, sand, gravel, aggregate, screenings, pulp and paper or any other moderate to heavy industrial situations. They are designed to protect conveyor belting against damage with low to medium impact and wear. This belting extends the service life of your system and reduces maintenance downtime.

Important Note: Styrene-butadiene rubber should not be exposed to petroleum, strong acids, most hydrocarbons or strong acids.

All State Conveyors are happy to advise which belt may be suitable for your individual application. ASC ContiTech conveyor belts are manufactured and supplied to Australian Standards 1332.

Our Stocked Range of AS-N Grade Conveyor Belts:

EP315/2P 3/1.5 AS-N AKA 2ply light
Nominal stock widths available: 300mm, 450mm, 600mm, 750mm, 900mm, 1050mm, 1200mm, 1800mm, 2200mm
To download EP315/2P 3/1.5 AS-N Product Fact Sheet, click here.

EP450/3P 3/1.5 AS-N AKA 3ply light
Nominal stock widths available: 300mm, 450mm, 600mm, 750mm, 900mm, 1050mm, 1200mm, 1800mm, 2200mm
To download EP450/3P 3/1.5 AS-N Product Fact Sheet, click here.

EP450/3P 5/1.5 AS-N AKA 3ply heavy
Nominal stock widths available: 300mm, 450mm, 600mm, 750mm, 900mm, 1050mm, 1200mm, 1800mm, 2200mm
To download EP450/3P 5/1.5 AS-N Product Fact Sheet, click here.

ASC Conveyor Belt Custom Configuration

All State Conveyors stocks a range of conveyor belting which can be configured with a range of high tensile strength fabric, including Crows Foot Weave (CFW) and Extra Cut and Gouge (XCG) covers. This combination of with high-quality belt covers and specialty layered plied ratings ensures the right strength factors. ASC conveyor belting gives you the optimum solution and confidence you need for maximum conveying performance.

All State Conveyors in-house engineering offers custom fabrication of belts with a range of rubber cleats to choose from should they be required

At the customers request, belt ends can be prepared for cold chemical joining or hot vulcanisation by the end user or supplied in slab rolls.

ASC conveyor belting gives you the optimum solution and confidence you need for maximum conveying performance.

All State Conveyors are happy to advise which belt may be suitable for your individual application. ASC ContiTech conveyor belts are manufactured and supplied to Australian Standards 1332

ASC Supplied Grade AS-M, DIN-X, AS-N, DIN-Y Conveyor Belts

  • Cut to specified widths and lengths
  • Endless with mechanical belt fasteners
  • Endless with cold material vulcanisation
  • Endless with hot material vulcanisation

 

Email or call us on 03 97066339 and talk to our belt specialists regarding your conveying requirements to find the ideal conveyor belt for your application, or to arrange a quote.